title background

9 energy saving tips for washing machines

7 minute read |

Washing machines are essential parts of any home and can consume a lot of power. “How much electricity does a washing machine use?” and “Does washing machine waste electricity?” are common concerns in many households.

In this article, Electrolux Arabia will address these concerns and give you 9 practical energy-saving tips for washing machines.

But first, let’s see how much power a washing machine actually uses.

 

How much electricity does a washing machine use?

 

The average power consumption of a washing machine can vary depending on several factors such as the machine's size, age, efficiency rating, and cycle settings. However, in general, a washing machine typically uses between 500 to 2,500 watts per cycle, with an average of around 1,000 watts.

If you run your washing machine three times a week, that can average out to about 150 kWh of electricity used in a year.

It's worth noting that most washers are designed to run on a 120-volt, 15-amp circuit, which means that they have a maximum power consumption of 1,800 watts. Some newer and more energy-saving washing machines can use as little as 150 to 500 watts per cycle.

9 energy saving tips for washing machines

 

Wash full loads

Washing full loads of laundry is more energy-efficient because the machine uses the same amount of energy to wash a full load as it does to wash a partial load. Additionally, washing more clothes at once means that you need to wash less often, which saves energy.

However, when washing a full load, make sure not to overload the machine, as this can reduce its effectiveness and increase wear and tear on the machine. Check your user manual for the appropriate load size for your chosen cycle.

Wash full loads

Washing full loads of laundry means that you need to wash less often, which saves energy


Use the right water level

 

Using too much water wastes energy and using too little can reduce the effectiveness of the wash. Most fully automatic washing machines such as Electrolux’s appliances have load sensing technology that automatically adjusts the water level based on the size of the load.

Watch the below animation video to understand how modern washing machines adjust time, water, energy consumption based on the weight of the load:

 

If your machine doesn't have this feature, make sure to use the right water level for the amount of laundry you're washing. Typically, the water level should be just enough to cover the clothes, without any excess water.

Use cold water


Heating water is one of the most energy-intensive parts of doing laundry.

Washing clothes in cold water instead of hot water can reduce energy consumption by up to 90%. Additionally, using cold water is often better for taking care of your clothes, particularly preserving the color and quality of clothes.

However, some stains may require hot water to remove, so it's important to check the care label on the garment before washing. If you have a stubborn stain, you may want to treat it before putting it into your washing machine for a cold wash.

Use Eco modes

If your washer has an ‘eco mode’, make sure to take advantage of it, since these modes are designed to reduce energy consumption by optimizing the washing cycle. Eco modes typically wash clothes at a lower temperature than regular cycles. This reduces the amount of energy needed to heat the water, which can save up to 50% of the energy used in a regular cycle.

They may also have shorter cycle times, which reduces the amount of time the machine is running and saves energy. This is achieved by optimizing the washing cycle and reducing unnecessary pauses or agitation.

Eco modes may also use less water than regular cycles. This is achieved by optimizing the water level based on the size of the load and reducing the number of rinse cycles needed.

Finally, some eco modes use load sensing technology to determine the size of the load and adjust the washing cycle accordingly. This ensures that the machine uses only the amount of water and energy needed for the load, rather than wasting resources on a larger cycle.

Read our post about how to operate your automatic washing machine to choose the right washing mode and use your washer more efficiently.

Use Eco modes

By optimizing the water level based on laundry load, Eco modes use less water than regular cycles

 

Use a high spin speed


Using a high spin speed to extract as much water as possible from your clothes reduces the time it takes to dry them, which saves energy.

Most washing machines have a high spin cycle that you can select, or you can manually adjust the spin speed based on the type of fabric you're washing. However, make sure not to use a high spin speed for delicate fabrics, since it could damage them.

>>> Related topics:

 

Use quick cycles


Quick modes are designed to reduce the time it takes to complete a wash cycle. While they may not be as energy efficient as eco modes, they can still help you save electricity.

Quick modes typically have shorter cycle times than regular cycles. This means that the machine is running for a shorter time, which reduces the amount of energy used. This is especially true for machines with a high spin speed, as they can extract more water from clothes, reducing the time needed for drying.

Choose an efficient washing machine

Energy-efficient washing machines are designed to use less water and electricity than traditional models. Look for models with great energy ratings such as Electrolux’s front load washing machines, which means they meet specific efficiency guidelines set by your country’s energy agency.

While more energy-saving washing machines may have a higher upfront cost, they can save you money on your energy bills in the long run.

Air dry clothes

Air drying clothes is the most energy-efficient way to dry them. Hang clothes outside on a clothesline or indoors on a drying rack to save energy.

Additionally, air drying is often better for preserving the quality of clothes, as the heat from the dryer can damage certain fabrics. If you do need to use a tumble dryer, make sure to use the appropriate heat setting for the type of fabric you're drying.

 

Air dry clothes

Air drying clothes not only saves energy but also is better for preserving the quality of clothes

 

Wash clothes less often

Not all clothes need to be washed after every use. Items like jeans or jackets can often be worn multiple times before needing to be washed. Washing clothes less often reduces the number of loads you need to wash and saves energy.

Additionally, make sure to spot clean clothes when possible to avoid unnecessary washing. When washing clothes, make sure to sort them by color and fabric type to ensure optimal cleaning and avoid the need for rewashing.

>>> Read more: How to clean a washing machine


Save more energy with Electrolux washing machines

 

At Electrolux, sustainability and energy efficiency are some of our core beliefs. That is why when you buy an Electrolux washing machine, you can rest assured that you’re able to save as much energy as possible.

Not only do Electrolux’s washing machines feature excellent energy ratings, but with technologies like the EcoInverter motor, which reduces vibrations and energy consumption, you can save up to 50% of energy compared to older washing machine models.

Check out our buying guide article if you are looking for helpful tips on how to choose a washing machine or you also want to take a look at some of our top-selling washing machines below:

  • UltraWash offers perfect cleaning at lower temperatures for less energy
  • Gentle care drum protects your delicate clothes
  • SteamCare reduces wrinkles by 30%
  • SteamCare System reduces wrinkles by 30%
  • SensiCare System automatically opimizes settings to adapt the load
  • Eco TimeManager allows less energy, more time
  • Eco TimeManager allows less energy, more time
  • Extra-large opening for easy loading and unloading
  • Gentler than traditional hand-washing
  • UltraCare pre-mixes detergent & softener perfectly before touching clothes
  • SteamCare reduces wrinkles by 30%
  • UltraWash cleans at lower temperatures for less energy
  • SensiCare protects clothes from over-washing
  • Fuzzy logic technology optimizes settings for less energy
  • Inverter motor for higher performance & silent working

FAQs about how to save energy when using washing machine

  • 1. How much water does a load of laundry use?

    Water usage level of front loader is generally lower than that of top loader. A front load washing machine normally consumes 55 to just over 110 liters of water per one wash, while these figures for top load washing machine should be somewhere between 150 and 170 liters.

    All Electrolux front load washing machines have Automatic Level Control (ALC) which automatically adjust the water usage according to the wash load thereby giving you high water efficiency in every washing cycle.

  • 2. What is the consumption of electricity by washing machine?
    A washing machine typically uses between 500 to 2,500 watts per cycle, with an average of around 1,000 watts. Newer and more energy-efficient models can use as little as 150 to 500 watts per cycle.
  • 3. When to use washing machine to save energy?
    Many believe washing at night might cost less but in terms of price per KWh, use washing machine during the day or at night is the same.
compare channel adviser image
Purchase

Purchase In-Store